Trumpeter 1/35 SA-6 Gainful

To get the ball rolling on this I have to cut the lower hull in two places. The first cut is directly behind the three raised ribs at the front of the hull however one of the location points for a swing arm is here so I will make a mould of it out of Milliput.
When dry I'll melt some sprue from the kit and push it into the mould and hopefully it will reproduce the part. Failing that I will have to make a new one from scratch.

The other end of the lower needs 6mm removing and just goes to show how far out the Trumpeter kit really is here. From what I have read and seen so far this is the only real issue with the kit, I'm just hoping there are enough track links included to cover the extra distance.