Another Luchs update

I had a whole one hour at the bench this afternoon so I glued a few etchy bits on;

Removing the moulded on tool clamps resulted in a couple of breakages probably due to my clumsiness, I was able to glue the axe together but I had to replace the engine crank handle with fuse wire and styrene rod. What was I saying about keeping things simple? I just can't help myself :o)

Luchs update

One thing I noticed about this kit is the lack of a tow cable. On the rear engine deck Tasca have provided the five clamps for one but not the cable so after a rummaging through the spares box and coming up with nothing I made my own using fine nylon thread and some 1mm dia. styrene rod drilled out for the thread to go through.
I estimated a length of 150mm for the cable and if anything it was a little too long but it's staying put. The clamps all face inward but I will carefully twist a couple around to avoid a uniform look.

One thing I am trying to avoid is getting too bogged down in research and super detailing as it can kill a little project like this stone dead but (there is ALWAYS a but) I do have some good references available such as Achtung Panzer No.6 and Panzers at Saumur No.1 and it seems a shame not to use them.